Latest news

On the basis of universal controller UT-1 is designed and implemented a centralized system management controller lubrication UT-10 A. 2008-06-08
Controller A UT-10 is designed to meet the challenges of managing a centralized lubrication systems, industrial equipment. Completed in standard housing CNMB / 9 for mounting on DIN - Rail. It has built-in power supply 24 to supply signalling circuits. According to the results of tests as a controller could not be better shown himself while working environments with increased dust, as well as the transfer of control signals and data over long distance (up to 1 km.). For more information on the controller can be found in the "Products" our site or in the "Download".

A universal controller of technological processes UT-1. 2008-05-22
The Controller is a microprocessor device capable to work both independently and in the composition of industrial complexes to manage the process.

Earn a forum of our site. 2008-05-12
The Forum focused on the development and introduction of new technologies in the Ukrainian market. It also will be presented to discuss all kinds of products manufactured Ltd. "UNT", the electronics, programming controller and high-level programming, as well as problems and solutions related to the development and introduction of new technologies in production processes. Preliminary (test) addressed the forum: http://www.unt-systems.com/forum/

Developing a system has begun a smooth start-up of industrial equipment. 2008-02-23
The enterprises are not rare cases of failure of industrial equipment, namely elements such as electrical, electronics and some mechanical parts. As izvesno elements of industrial equipment fell, as a rule of order at the stage start-up or shutdown, so many manufacturers went out of the situation installing additional equipment to make possible a smooth launch. A smooth start-up built on a completely new technology will enable Intelligent start adjust under any type of hardware to make it start / stop more "flexible" and extend the maximum life of expensive equipment.

Has begun the development of universal CNC to manage any type of equipment. 2008-02-09
Stance developed on the basis of conventional computers running Windows system and would manage any machines with the number of coordinates equal to three or less, would interact with any CAD systems and manage equipment remotely. Approximate cost of such equipment (together with a computer and control system) range from 10 thousand hryvnias.

Ended development throughput card system in the enterprise. 2007-12-18
A distinctive feature of the system yavlyaetsyaprostota connection and use. For an ordinary personal computer used to kartriderami that allows many times to reduce system cost compared with similar. As the turnstiles to use existing enterprise system with turnstiles opening footswitch, which was fully electronic system pereosnaschen opening. Job management system is implemented method of reading data from kartriderov (SOM1 port and port SOM2 respectively at entry and exit) and issuing a signal of opening / closing at electromagnet via LPT port of a computer. The level of TTL signal LPT port is ideally suited for management purposes, opening / closing the turnstiles, as well as to read data from capacitive sensors motion wheel turnstiles. With full details, see photo on the web site under "Products".

Completed the full restoration of experimental lathes 1 V340F30. 2007-12-09
More about restores equipment you can learn at: http://www.en.unt-systems.com/catalog/prod/3/

Ended develop a system for calculating PVC windows and wooden windows ARM Windows. 2007-11-10
ARM Windows Manager program is intended to facilitate labour sales managers, production managers, technologists and the actual production itself. Software allows many times improve the accuracy and speed calculations, as well as possible to simplify the preparation of documentation for both the client and for the people directly involved in the production of plastic windows and wooden evrookon. Experimental system installed at the plant for the production of wood and metal HP "Maple Leaf" (www.klen.biz). The company is the largest producer of wood products (parquet, evrookna, oak desks, doors, etc.) in Ukraine, as well as the largest exporter of goods to CIS countries, Europe and America.
More...

Initiation of full restoration of experimental lathes 1 V340F30. 2007-08-08
The machine was purchased for a small amount as is completely non condition. Now tries to fully restore the machine starting with the mechanics and finishing the installation of new programmable CNC. The results of the work, tiles and photo will be on our site, following the successful completion of works.

Started development throughput card system in the enterprise. 2007-08-01
A distinctive feature of the system will be easy to connect and use. For an ordinary personal computer used to kartriderami that allows many times to reduce system cost compared with similar. Turnstiles produced by OOO "Master Milk" and equipped with the electronic system opening. 16.08.2007 town Nalazhena work on reading data from kartriderov (SOM1 port and port SOM2 respectively at entry and exit) and issuing a signal of opening / closing at electromagnet via LPT port of a computer. The level of TTL signal LPT port is ideally suited for management purposes, opening / closing the turnstiles, as well as to read data from capacitive sensors motion wheel turnstiles.

Ended develop welding machine NT-01. 2007-02-08
Welding apparatus developed on the basis of an entirely new pulsed power supply that has reduced not only the dimensions of the welding apparatus, but also weight (about 4 kg!). Compensator power built into the device clears reactive component in the diet, as well as stabilizes voltage network. The range of operating voltage ranges from 110 V to 380 V, in this environment welding apparatus fully retain their working parameters, the output current of 250 A with 5 kW power. Unique technology allows cooking cook non-ferrous metals, including aluminum and without aggressive environment!. Estimated date of the tests appointed to the March 25, 2007 For more information, technical specifications, as well as price will be posted on the site after the tests.

Earn section on "Interactive". 2006-10-03
We invite your questions to ask our staff in this section.

We offer a questionnaire for potential customers. 2006-09-23
In the "Download" on the site appeared "Primary questionnaire order", suggest that, when seeking to fill and download manager. This will greatly accelerate the selection of products.

Opening the site. 2006-06-15
First test news!